The Secret Process of Cabinet Wiring Harness Processing!

The Secret Process of Cabinet Wiring Harness Processing! The world today is a high-tech world, and various electronic devices have entered everyone's daily life. Convenient for everyone's daily life, but we need to understand that cabinet wiring harness processing will appear on most electronic devices, and if not, it will be replaced by some items. The role of is indispensable. I won't explain more about the rest. Let me explain the basic information of the detailed processing steps for cabinet wiring harnesses. Detailed explanation of the processing steps for electronic device cabinet wiring harness, what is electronic device wiring harness? Simply put, the processing of cabinet wiring harness is the use of electronic devices to control the input and output power lines.

Processing and manufacturing steps for electronic equipment cabinet wiring harness:

1. Cutting: Check if the specifications of the cable are suitable; Whether the limit meets the requirements.

2. Peeling: Check whether the peeling opening is flush, the core wire, assembly wire, etc. cannot be peeled off, and whether the peeling limit is appropriate.

3. Team up handling: Check whether the thread cutting limit is appropriate, whether the thread cutting is flush, and whether the core wire cannot be damaged during thread cutting.

4. Peeling: Check if the peeling opening is flush; Whether the stripping limit is appropriate; Whether the core wire is peeling or the copper wire is broken; During semi stripping, the conductor and insulator must not fall off.

5. Sleeve reduction tube: Check if the limit and type of reduction tube are suitable.

6. Prepare solder wire in advance: check if the temperature of the tin furnace is suitable; Prepare the solder wire in advance to ensure that the core wire and copper wire are well sorted, and whether there are branches, bumps, creases, etc; After preparing the soldering wire in advance, check if there are any signs of copper wire forking, most of the copper wires being uneven, and insulation layer damage caused by scalding.

7. Solder wire: Check if the temperature of ferrochrome is suitable; The insulation layer should not be burned, the tin points should be lubricated, and the Wuxi soldering iron head should not be soldered or empty.

8. Terminal crimping: Check if the specifications of the terminals and cables are suitable; Is there any horn period, tilt, insulation layer and core wire too long or too short during terminal crimping.

9. Terminal penetration: Check whether the RF connector and terminal type are suitable; Whether the terminals are damaged or deformed; Whether the terminals are lost, inserted incorrectly, or not pierced in a timely manner.

10. Line socket: Check if the model of the RF connector is suitable; Is the direction of the wire row appropriate; Whether the core wire is damaged, bare copper, or burned; Is the socket timely.

11. Blow reducing tube: Check if the reduction of the tube is excellent, and the insulation layer should not be burned.

12. Assembling the casing: Check if the casing is installed backwards, whether there are scratches, burrs, missing parts, screws for tightening, air oxidation, discoloration, looseness, and any defects after assembly. If the casing is oriented, it must be assembled as required.

13. Marking: Check whether the marking content is appropriate, clear, and without hyphens; Is the boundary of the sign appropriate; Whether the logo is dirty or damaged; Is the direction of the sign appropriate.

14. Tie the cable tie: Check if the specification, color, and direction of the tie are suitable; No cracks or loose appearance.

15. Injection molding process: Check if there are stains on the grinding tool, and if there are any missing materials, bubbles, poor adhesion, and poor hardening in the molding area.

16. Power plug molding: Check the power plug for damage, unevenness, lack of material, burrs, dirt, flow lines, etc., and confirm that the metal material terminals are not deformed, damaged, or bare copper.

17. Electrical equipment inspection: Conduct inspection according to the requirements of the relevant product inspection special guide ticket.

18. Appearance inspection: Be aware that all new items that can be seen must be inspected.