How to Choose a Suitable Connector for Wire Harness-3C Electronics

How to Choose a Suitable Connector for Wire Harnesses -3C Electronics&Appliances Chapter

There are tens of millions of connectors available on the market, with several series commonly used on the market. We use them to reduce the sample stage cost of the project, reduce research and development time, and reduce the cost of purchasing from abroad (3-5 weeks) to the same day of shipment, and receive them the next day. So as to quickly start the project. And some products have been improved to have higher reliability than the original factory.

Connector for precision intelligent wearable wiring harness:

0.6 spacing: XSR0.6 (Teflon)

0.8 spacing: SUR0.8 (Teflon wire),

Connector for consumer electronics:

1.0 Spacing:

SH1.0 (conventional, current: 1A, voltage: 50V)

NH1.0 (with buckle, current: 1A, voltage: 50V)

SHL1.0 (ultra thin, current: 1A, voltage: 50V)

1.25 Spacing:

51021 (conventional, current: 1A, current: 125V)

51146 (ultra thin, current: 1A, current: 125V)

GH1.25 (with buckle, current: 1A, current: 125V)

1.5 Spacing:

ZH1.5 (conventional, current 1A, voltage within 100V, can be air connected)

87439 (conventional, current 3A, voltage 250V)

2.0 Spacing:

PH2.0 (conventional, current 2A, voltage within 100V)

PHB2.0 (with buckle, current 3A, voltage within 250V)

PA2.0 (Add guide groove and lock catch on the basis of PH, current: 3A, voltage: within 250V)

2.5 Spacing:

XH2.5 (conventional, current: 3A, voltage within 250V)

XHB2.5 (with buckle, current: 3A, voltage within 250V)

XA2.5 (Add guide slot and lock catch on the basis of XH, current: 3A, voltage within 250V)

Connector series for board to board link harnesses

1.25 spacing: 51022 (current 1A, voltage 125V)

1.5 Spacing: JZ15 (vertical, current 1A, voltage 200V), SZN1.5 (horizontal, current 1A, voltage 200V)

2.0 spacing: SAN2.0 (vertical, current 2A, voltage 250V), JB20 (horizontal, current 2A, voltage 250V)

2.5 Spacing: SCN2.5 (vertical, current 3A, voltage 250V), JC25 (horizontal, current 3A, voltage 250V)

3.96 Spacing: SDN (vertical, current 7A, voltage 250V), JE40 (vertical, current 7A, voltage 300V)

The above connectors are all used in consumer electronics, which are cost-effective and can effectively save costs and improve project startup.